熊田明裕, 屋口正次, 駒崎慎一 .  9Cr鋼配管の微小サンプル採取加工精度 .  火力原子力発電Vol.72 ( No.1 ) 62 - 68   2022.19Cr鋼配管の微小サンプル採取加工精度

Yakai Zhao, Jeong-Min Park, Kotaro Murakami, Shin-ichi Komazaki, Megumi Kawasaki, Koichi Tsuchiya, Jin-Yoo Suh, Upadrasta Ramamurty, Jae-il Jang .  Exploring the hydrogen absorption and strengthening behavior in nanocrystalline face-centered cubic high-entropy alloys .  Scripta MaterialiaVol.203   114069   2021.10Exploring the hydrogen absorption and strengthening behavior in nanocrystalline face-centered cubic high-entropy alloysReviewed International coauthorship

Shin-ichi Komazaki and Shintaro Nimura .  Fatigue Damage Assessment of Low-Alloy Steel Based on Change in Hydrogen Thermal Desorption Characteristic .  Fatigue & Fracture of Engineering Materials & StructuresVol.44   1799 - 1807   2021.4Fatigue Damage Assessment of Low-Alloy Steel Based on Change in Hydrogen Thermal Desorption CharacteristicReviewed

Jeong-Min Park, Yakai Zhao, Guanghui Yang, Thomas Voisin, Dong-Hyun Lee, Shin-ichi Komazaki, Yoonseok Ko, Dong-Ik Kim, Jin-Yoo Suh, Heung Nam Han, Y. Morris Wang, Upadrasta Ramamurty, Jae-il Jang .  Hydrogen uptake and its influence in selective laser melted austenitic stainless steel: A nanoindentation study .  Scripta Materialia194   2021.3Hydrogen uptake and its influence in selective laser melted austenitic stainless steel: A nanoindentation studyReviewed International coauthorship

Takuya Kamimura, Hayato Yamashita, Koichi Sato, Tsunakazu Ohyama, Yoshinori Kimoto, Qiu Xu and Shin-ichi Komazaki .  Comparison of Hydrogen Thermal Desorption Analysis Curves of Electron-irradiated F82H and Creep-Ruptured Pure Fe Obtained by Experiments and Simulations .  Materials Science Forum1024   135 - 144   2021.3Comparison of Hydrogen Thermal Desorption Analysis Curves of Electron-irradiated F82H and Creep-Ruptured Pure Fe Obtained by Experiments and SimulationsReviewed International coauthorship

Takuya Kamimura, Hayato Yamashita, Koichi Sato, Tsunakazu Ohyama, Yoshinori Kimoto, Qiu Xu, Shin Ichi Komazaki .  Comparison of Hydrogen Thermal Desorption Analysis Curves of Electron-Irradiated F82H and Creep-Ruptured Pure Fe Obtained by Experiments and Simulations .  Materials Science Forum1024   135 - 144   2021.3

渡部康明, 山下満男, 和泉 栄, 駒崎慎一, 森 幸貴 .  タービン用高Cr鋼の時効およびクリープに伴うスモールパンチ試験特性の変化 .  材料70   133 - 139   2021.2タービン用高Cr鋼の時効およびクリープに伴うスモールパンチ試験特性の変化Reviewed

駒崎慎一, 大山綱一, 佐藤紘一, 谷川博康, 野澤貴史, 濱口 大, 渡辺淑之 .  低放射化フェライト鋼のクリープに伴う水素昇温脱離特性の変化 .  材料70   140 - 146   2021.2低放射化フェライト鋼のクリープに伴う水素昇温脱離特性の変化Reviewed

スモールパンチ試験法による9Cr鋼ボイラ配管のクリープ特性評価 .  材料70   125 - 132   2021.2スモールパンチ試験法による9Cr鋼ボイラ配管のクリープ特性評価Reviewed

Maribel L. Saucedo-Muñoz, Shin-ichi Komazaki, Erika O. Avila-Davila, Victor M. Lopez-Hirata, Hector J. Dorantes-Rosales .  Precipitation Characterization and Creep Strength at 600°C for Creep Resistant Cr-Mo Steel .    60   2059 - 2067   2020.9Precipitation Characterization and Creep Strength at 600°C for Creep Resistant Cr-Mo SteelReviewed International coauthorship

屋口正次, 金井雅之, 駒崎慎一, 熊田明裕 .  微小サンプル採取が9Cr 鋼配管のクリープ寿命に及ぼす影響の評価 .  日本機械学会論文集（A編）86 ( 883 )   2020.3微小サンプル採取が9Cr 鋼配管のクリープ寿命に及ぼす影響の評価Invited Reviewed

S. Komazaki, R. Jojima, N. Muraoka, S. Nogami, M. Kamaya, C. Hisaka, M. Fujiwara and A. Nitta .  Development of Small Bulge Fatigue Testing Technique Using Small Disk-Type Specimen .  Fatigue & Fracture of Engineering Materials & Structures43 ( 3 ) 444 - 456   2020.3Development of Small Bulge Fatigue Testing Technique Using Small Disk-Type SpecimenReviewed

村上幸太郎, 駒崎慎一, 田淵正明, 本郷宏通 .  水素昇温脱離分析法によるボイラ配管溶接継手部のクリープ損傷評価 .  ボイラ研究419   11 - 16   2020.2水素昇温脱離分析法によるボイラ配管溶接継手部のクリープ損傷評価Reviewed

Kotaro Murakami, Shin-ichi Komazaki and Toshiki Mitsueda .  Creep Property Assessment of Service-Exposed 2.25Cr-1Mo Steel Boiler Piping by Small Punch Test .  10th Japan-China Bilateral Symposium on High Temperature Strength of Materials   367 - 369   2019.10Creep Property Assessment of Service-Exposed 2.25Cr-1Mo Steel Boiler Piping by Small Punch Test

Maribel L. Saucedo-Muñoz, Valeria Miranda-Lopez, Shin-ichi Komazaki and Victor M. Lopez-Hirata .  Effect of Carbide Precipitation on Creep Strength of 5Cr-0.5Mo Steel .  10th Japan-China Bilateral Symposium on High Temperature Strength of Materials   377 - 382   2019.10Effect of Carbide Precipitation on Creep Strength of 5Cr-0.5Mo Steel

Ferdinand Dobeš, Petr Dymáček, Shin-ichi Komazaki and Yingzhi Li .  Towards the development of a universal formula for conversion of Small Punch data to Conventional Creep data .  10th Japan-China Bilateral Symposium on High Temperature Strength of Materials   370 - 373   2019.10Towards the development of a universal formula for conversion of Small Punch data to Conventional Creep data

M. L. Saucedo-Muñoz, V. Miranda-Lopez, S. Komazaki, V. M. Lopez-Hirata .  Relation of Small Punch Creep Test Properties with Microstructure Changes for an ASTM A387 Cr-Mo Steel .  Materials Science and Engineering A761   2019.7Relation of Small Punch Creep Test Properties with Microstructure Changes for an ASTM A387 Cr-Mo SteelReviewed

Shin-ichi Komazaki .  Damage Assessment of Structural Materials Based on Change in Hydrogen Thermal Desorption Characteristic .  Abstract book of Asia Pacific Society for Materials Research 2019 Annual Meeting   2019.7Damage Assessment of Structural Materials Based on Change in Hydrogen Thermal Desorption CharacteristicInvited

Kotaro Murakami, Shin-ichi Komazaki and Toshiki Mitsueda .  Creep Property Measurement of Service-Exposed 2.25Cr-1Mo Steel Boiler Piping by Small Punch Test .  Abstract book of 28th International Conference on Metallurgy and Materials   56   2019.5Creep Property Measurement of Service-Exposed 2.25Cr-1Mo Steel Boiler Piping by Small Punch Test

Naveena and S. Komazaki .  Small Punch Creep Life Prediction from Steady-State Deflection Rate in High-Chromium Ferritic Heat-Resistant Steels .  Metallurgical and Materials Transactions A50 ( 4 ) 1655 - 1662   2019.4Small Punch Creep Life Prediction from Steady-State Deflection Rate in High-Chromium Ferritic Heat-Resistant SteelsReviewed

駒崎慎一, 内村　洋, 山下勇人, 楠元淳一, 田渕　豊 .  改良スモールパンチ試験法による12%Cr耐熱鋼溶接継手のクリープ特性評価 .  材料   2016.4改良スモールパンチ試験法による12%Cr耐熱鋼溶接継手のクリープ特性評価Reviewed

山下勇人, 駒崎慎一, 大島将史 .  水素昇温脱離分析法によるGr.122鋼溶接継手部のクリープ損傷評価 .  材料   2016.4水素昇温脱離分析法によるGr.122鋼溶接継手部のクリープ損傷評価Reviewed

Toshiya Nakata, Shin-ichi Komazaki, Yutaka Kohno, Hiroyasu Tanigawa .  Development of a small punch testing method to evaluate the creep property of high Cr ferritic steel: Part I—Effect of atmosphere on creep deformation behavior .  Materials Science & Engineering A   2016Development of a small punch testing method to evaluate the creep property of high Cr ferritic steel: Part I—Effect of atmosphere on creep deformation behaviorReviewed

Toshiya Nakata, Shin-ichi Komazaki, Yutaka Kohno, Hiroyasu Tanigaw .  Development of a small punch testing method to evaluate the creep property of high Cr ferritic steel: Part II – Stress analysis of small punch test specimen by finite element method .  Materials Science & Engineering A   2016Development of a small punch testing method to evaluate the creep property of high Cr ferritic steel: Part II – Stress analysis of small punch test specimen by finite element method

M. Nakajima, S. Komazaki and T. Shoji .  Influence of Hydrogen in Steel on Oxidation Behavior of Low Carbon Austenitic Stainless Steel in High Temperature Water .  E-Journal of Advanced Maintenance5 ( 3 ) 175 - 184   2013Influence of Hydrogen in Steel on Oxidation Behavior of Low Carbon Austenitic Stainless Steel in High Temperature WaterReviewed

駒崎 慎一 .  高温機器における余寿命診断技術の最前線 2. SPクリープ試験法を用いた余寿命診断技術の開発 .  材料61   980 - 986   2012.12高温機器における余寿命診断技術の最前線 2. SPクリープ試験法を用いた余寿命診断技術の開発Reviewed

中島基樹, 細川将之, 駒崎慎一, 庄子哲雄 .  低炭素オーステナイト系ステンレス鋼の大気酸化挙動に及ぼす鋼中水素の影響 .  日本金属学会誌75 ( 4 ) 243 - 247   2011.4低炭素オーステナイト系ステンレス鋼の大気酸化挙動に及ぼす鋼中水素の影響Reviewed

T. Sakamura, S. Komazaki, H. Kishimoto and Y. Kohno .  Testing Temperature and Deflection Rates Dependencies of Hydrogen Embrittlement on RAFs .  Journal of Nuclear Materials417   33 - 35   2011.3Testing Temperature and Deflection Rates Dependencies of Hydrogen Embrittlement on RAFsReviewed

駒崎慎一, 小西勇也, 金谷章宏, 渡邉 肇, 楠元淳一 .  長方形状SP試験片による高Crフェライト系耐熱鋼溶接継手のクリープ変形・破壊挙動 .  材料60 ( 2 ) 139 - 145   2011.2長方形状SP試験片による高Crフェライト系耐熱鋼溶接継手のクリープ変形・破壊挙動Reviewed

阿部陽介, 駒崎慎一, 三枝利紀 .  12%Crフェライト系耐熱鋼のクリープに伴うアノード分極特性の変化 .  材料60 ( 2 ) 124 - 130   2011.212%Crフェライト系耐熱鋼のクリープに伴うアノード分極特性の変化Reviewed

駒崎慎一, 本田哲也, 坂村喬史, 澤田浩太, 木村一弘, 幸野 豊 .  Mod.9Cr-1Mo鋼のクリープに伴う水素放出特性の変化 .  鉄と鋼96 ( 10 ) 614 - 619   2010.10Mod.9Cr-1Mo鋼のクリープに伴う水素放出特性の変化Reviewed

S. Komazaki and T. Kato .  Creep Properties Measurements of Heat-Affected Zones of High Cr Ferritic Steel by SP Creep Test”, Materials at High Temperatures .  Materials at High Temperatures27 ( 3 ) 205 - 209   2010.9Creep Properties Measurements of Heat-Affected Zones of High Cr Ferritic Steel by SP Creep Test”, Materials at High TemperaturesReviewed

駒崎慎一, 寺田忠平, 沓澤統太, 森谷信一 .  Cu-Cr-Zr合金の機械的特性に及ぼす酸化および水素添加の影響 .  日本機械学会論文集(A編)76 ( 768 ) 1103 - 1109   2010.8Cu-Cr-Zr合金の機械的特性に及ぼす酸化および水素添加の影響Reviewed

東野和幸, 駒崎慎一, 笹山容資, 木元健一, 坂口裕之, 石橋利幸 .  ロケット燃焼室におけるニッケル電鋳特性向上に関する基礎研究 .  日本航空宇宙学会論文集58 ( 676 ) 146 - 151   2010.5ロケット燃焼室におけるニッケル電鋳特性向上に関する基礎研究Reviewed

M. Nakajima, S. Komazaki and Y. Kohno .  Changes in Contributions of Matrix and Block Boundary Strengths to Macroscopic Hardness of High Cr Ferritic Steel during Creep .  Transactions of The Indian Institute of Metals63 ( 42038 ) 473 - 477   2010.4Changes in Contributions of Matrix and Block Boundary Strengths to Macroscopic Hardness of High Cr Ferritic Steel during CreepReviewed

Y. Abe, S. Komazaki, T. Mitsueda and Y. Kohno .  Change in Electrochemical Property of 12%Cr Ferritic Steel in 1M-KOH Solution Due to Creep .  Advanced Materials Research89-90   1 - 5   2010.1Change in Electrochemical Property of 12%Cr Ferritic Steel in 1M-KOH Solution Due to CreepReviewed

山下勇人，駒崎慎一，米村光治，五十嵐正晃   水素放出特性変化に基づいたＧｒ．９１鋼のクリープ余寿命評価  

日本材料学会 第４９回高温強度シンポジウム  日本材料学会 第４９回高温強度シンポジウム

T. Nakata, S. Komazaki, Y. Kohno and H. Tanigawa   Effects of Configuration and Sizes of Test Rig and Specimen on Small Punch Creep Properties   International conference

Metallurgical Journal, Vol. LXIII  Metallurgical Journal, Vol. LXIII

I. Nonaka, A. Kanaya, S. Komazaki and K. Kobayashi   Standardization of Test for Small Punch Creep Testing in Japan   International conference

Metallurgical Journal, Vol. LXIII  Metallurgical Journal, Vol. LXIII

T. Fujioka, N. Atsumi, S. Komazaki, T. Kobayashi and I. Nonaka   Finite Element Analysis of Small Punch/Small Punch Creep Test Specimens of 2.25Cr-1Mo Steel Performed in the Japanese Research Group   International conference

Metallurgical Journal, Vol. LXIII  Metallurgical Journal, Vol. LXIII

Motoki Nakajima, Masayuki Hosokawa, Takanori Sugimura, Shin-ichi Komazaki   Influence of Hydrogen-Charging on Oxidation of SUSF316L in Simulated BWR Environment   International conference

ASME 2010 Pressure Vessels & Piping Division / K-PVP Conference  ASME 2010 Pressure Vessels & Piping Division / K-PVP Conference

S. Komazaki, Y. Konishi, A. Kanaya, H. Watanabe and J. Kusumoto   Creep Damage Evaluation of Welded Joint of High Cr Ferritic Steel by Small Punch Creep Test   International conference

HIDA-5 (High-Temperature Defect Assessment)  HIDA-5 (High-Temperature Defect Assessment)